Boiler rapid repair (breakdowns / no heat)
Fast diagnostics and proper repairs where possible. If it’s fixable, we fix it. If it’s not worth repairing, we’ll tell you straight — no dragging it out.

If your boiler’s dropped out and the house is going cold, or you’ve spotted a leak and you can already tell it’s not a “wait until tomorrow” job — call us. We cover Barking and Dagenham daily and we push for same-day call-outs across East London whenever possible.
If you’re stuck near Barking Station, the A13 or around Heathway with no heating — say that on the call and we’ll give you a realistic ETA (traffic here can flip fast). Call +44 7727 154746.
Barking and Dagenham is one of those areas where you get everything — ex-council homes, newer builds, HMOs, busy family houses — and the boiler issues tend to come in waves. The classic one? Pressure drops, then “no hot water”, then a reset button that gets hammered all day.
You’ll usually speak to Abdul (Gas Safe 626557) or someone who’s actually on the tools — not a script-reader. We’ll ask a couple questions (make/model, pressure, any error code) and you’ll get a clear answer: either a quick fix you can do safely, or we book the visit and sort it properly.
Here are the core pages most people end up needing: boiler repairs and breakdown call-outs, Gas Safe boiler installation in London, and if you’re trying to work out budget, our breakdown of new boiler cost & installation.
That cost guide covers the type of searches you’re already seeing in your tools — “cost of boiler replacement UK”, “boiler replacement cost UK”, “cost to replace boiler”, “new boilers cost”. It’s the right place for those phrases. This page stays local and action-based.
1) Condensate pipe frozen/blocked (winter) — boiler locks out.
2) Slow leak on a radiator valve — boiler keeps losing pressure until it stops.
If you’re not sure which it is, call and we’ll guide you: +44 7727 154746.

We’re plumbers, yes — but most calls here are boiler-led. When people search, it’s usually urgent: “boiler rapid repair”, “no hot water”, “heating not working”, or they’re planning a replacement.
Fast diagnostics and proper repairs where possible. If it’s fixable, we fix it. If it’s not worth repairing, we’ll tell you straight — no dragging it out.
If you’re typing “how much new boiler installed” or “boiler cost new”, you’re probably weighing up replacement. We’ll size it correctly, install cleanly, commission it properly, and explain controls so you’re not guessing later.
A real service — combustion checks, safety checks, performance checks, and the small stuff that prevents winter lockouts. Ideal for homeowners and landlords who want fewer surprises.
Radiators not heating, leaking valves, dripping pipework, blocked drains — often the hidden cause behind pressure drops. We deal with the cause, not just “top up the boiler and hope”.
And if the boiler issue is actually electrical (fused spur, tripping, wiring fault), we can cover electrical fault finding without you booking a separate company.
If you’re near Becontree, Dagenham Heathway or along the A13 and the boiler’s off — call now and we’ll tell you what we can do today.
We see this every day: someone Googles “cost of a boiler replacement” and gets 20 different numbers. Half of them are pointless because they ignore the real drivers: boiler type, system layout, flue route, and any conversion work.
So rather than dumping pricing guesses into a Barking & Dagenham page, we keep the full breakdown here: cost new boiler installation (London). That guide is built to rank for those terms — “boiler replacement cost UK”, “new boilers cost”, “cost to replace boiler”, and so on — while this page stays conversion-focused.
If you’re searching “govt boiler scheme”, we’ve got a simple explainer too: govt boiler scheme & grant guide. Quick read, no waffle.
We cover the borough properly. The areas we’re most often called into:
Busy streets, flats, and fast “no hot water” call-outs near transport links.
Older heating setups and pressure drops that trace back to slow leaks and tired valves.
Common radiator and pipework issues — we see a lot of “one room cold” systems here.
High call volume zone — quick access routes but traffic can be heavy at peak times.
Boiler lockouts, leaking valves and pressure drops in mixed housing stock.
Border pocket where we’re already working frequently across the East London routes.
Breakdowns and “no hot water” calls where quick access planning matters.
Overlap area for RM6/RM8 edges — easy to route in when we’re nearby.
If you’ve got gas appliances in a small business unit and need checks or repairs, mention it on the phone — we can advise on commercial gas appliance service and whether it fits your situation.
Often yes, especially in IG11/RM8/RM9/RM10 zones. If we can’t do same-day, we’ll give you the earliest realistic slot straight away.
It depends on your system and whether it’s a swap or a conversion. We keep the full breakdown on our guide here: new boiler cost and installation.
If it’s a straight combi swap, it’s usually simpler. If it’s a conversion, that’s where costs change. Tell us what you’ve got now and we’ll advise properly — not guess.
Yes — servicing is one of the best ways to keep tenants from calling you at 2am in January. We’ll run the checks properly and flag anything that looks like it’s heading for a breakdown.
Sometimes — depends on the scheme and eligibility. Here’s our simple explainer: govt boiler scheme guide.
Yes. Abdul is Gas Safe registered. Number: 626557.
Boiler off, no hot water, pressure dropping, or a leak getting worse? Call now and you’ll speak to someone who actually does the work. Same-day call-outs across East London wherever possible.